avalon stargo

manu

dear

I need help, my stargo is not recognized by asiair. (mount M-zero)

message : connect failed

I connect directly asiair to stargo using usb to usb because there're not rs232 port on stargo

speed 9600 baud, i try other, same problem

i try with lx200 protocol same problem

asiair v1.2.1 firmware 2.64

i've read that the connection on Indi is only with usb-usb cable, if asiair use indy librairy, it should be same ?

https://www.indilib.org/devices/mounts/avalon.html

best regard, 谢谢

Emmanuel

Tech@ZWO

Hi Emmanuel

Have you tried on Ekos or MDL5.

The connection should be correct. have a try on 115200 baud or some baud

https://www.facebook.com/search/top/?q=avalon%20stargo&epa=FILTERS&filters=eyJycF9hdXRob3IiOiJ7XCJuYW1lXCI6XCJteV9ncm91cHNfYW5kX3BhZ2VzX3Bvc3RzXCIsXCJhcmdzXCI6XCJcIn0ifQ%3D%3D

manu

look like someone have find the solution with the avalon legacy driver

https://bbs.astronomy-imaging-camera.com/viewtopic.php?f=33&t=10263

daan

Please be aware that the legacy driver is functionally very limited and you cannot select any objects. We really need to get the Avalon Stargo driver working. It has almost all of the functionality of Stargo

PMTeam@ZWO

Daan wrote:

Please be aware that the legacy driver is functionally very limited and you cannot select any objects. We really need to get the Avalon Stargo driver working. It has almost all of the functionality of Stargo

Thank you for your info. We are working on it now.