EAF for Celestron C8

jscivally

Hello, I would like to know if there will be an EAF for a Celeston C8 with a Starlight instruments focuser, I have talked to Starlight and they don't think their box for their motor focuser is compatible with your ASI AIR. Thank you. Jim

katherine.tsai

Which focuser do you refer?

Could you give us a picture of lower part of the focuser?

jscivally

Hello, thank you for the quick reply, the model number is Starlight Instruments FTM-CPC8. I did not have any luck loading a picture.

katherine.tsai

I think it does not support. But we are made a new bracket, can you tell us the size in the picture?

jscivally

Hello, I talked to Wayne at Starlight Instruments and this is response. Please advise. Thank you

Jim if there hub/control box will control a bi-polar motor then my HSM motor SHOULD work. My HSM motors use a standard Ethernet cable. If their controller will only control a uni-polar motor, my MSM motor SHOULD work as it is a uni-polar motor and uses a 6 pin cable.

dark energy

Hi,

a bracket for SCTs? That's great news!

Will the bracket fit onto the focuser

shown in the attachment?

When will it be available? Today? Tomorrow? ;-)

Best regards

MarkusSC-Focuser.pdf

katherine.tsai

Sorry, we encountered an error while displaying this content. If you're a user, please try again later. If you're an administrator, take a look in your Flarum log files for more information.

katherine.tsai

JSCIVALLY wrote:

Hello, I talked to Wayne at Starlight Instruments and this is response. Please advise. Thank you

Jim if there hub/control box will control a bi-polar motor then my HSM motor SHOULD work. My HSM motors use a standard Ethernet cable. If their controller will only control a uni-polar motor, my MSM motor SHOULD work as it is a uni-polar motor and uses a 6 pin cable.

Sorry I did not follow you?

katherine.tsai

Katherine.Tsai wrote:

JSCIVALLY wrote:

Hello, I talked to Wayne at Starlight Instruments and this is response. Please advise. Thank you

Jim if there hub/control box will control a bi-polar motor then my HSM motor SHOULD work. My HSM motors use a standard Ethernet cable. If their controller will only control a uni-polar motor, my MSM motor SHOULD work as it is a uni-polar motor and uses a 6 pin cable.

Sorry I did not understand your meaning?