Celestron 5SE

Since the last App store update I have been unable to get a reliable connection to my Celestron 5SE. It worked fine prior to the update ?

AsiAir connects then refuses to display any of the Telescope menus..... Sometimes after a random period of time it all starts working...

Thanks

Chris

Hi Chris

How did you connect your mount to your Asiair

and your settings on your Asiair

The mount is connected to the AsiAir with a USB cable plugged into the bottom of the handset.

The AsiAir is set to Celestron SE, Serial-USB and 9600 Baud.

When you enable control the USB-Serial icon turns grey but no menus appear lower down the screen.

Sometimes after it's been in use for a random period of time the menus appear and it all leaps into life....

Worked fine before the last App store and firmware update...

Thanks

Chris

it seems the settings were OK

i did not get the Celestron 5SE，so can not take a verification on it

you can try to connect 5SE to MDL or kstar on pc

Hi,

Tried using Celestron CPWI software and it works a treat.

Tried using APT 3.70 and again it works well...

Though I think these both use the Ascom drivers...

Chris

All fixed in V1.4

Mount control works well.

Sync to Mount feature also now working again....

Many thanks for fixing !

Chris

chris packman wrote:

All fixed in V1.4

Mount control works well.

Sync to Mount feature also now working again....

Many thanks for fixing !

Chris

Great, the v1.4.1 is on the way.