ES PMC 8 WiFi and ASIAIR Pro

HPayne

On page 8 of the ASIAIR Pro user manual is this statement:
“1.Connecting via WiFi EQ Mount ASIAIR PRO
Some mounts now have built-in WiFi modules or provided an an external WiFi accessories, such as A Z-GTi with SynScan WiFi module, StarFi Wi-Fi Adapter, SkyPortal WiFi Module, StarGo WiFi mode, PMC-8 Wi-Fi mode etc. For a detailed description of ASIAIR PRO connections, please refer to the relevant documents on the support page of ZWO official website.”
However I cannot find any guidance on how to connect PMC 8 and ASIAIR pro via wifi. I know there is a process for enabling use of a serial cable, however I am interested in using wifi. Please advise, thanks

Tech@ZWO

How to connect iEXOS100 to Asiair

Change the interface from the default WiFi Port (interface 1) to the Serial Port(interface 0), do the following:

Set your SSID to the PMC-Eight-xx, whichever yours is.
Using Putty, TELNET into address 192.168.47.1 port 54372.
You should be greeted with the HELLO prompt of the RN-131 module.
Enter "###", and you should see "Diagnostic Mode Disabled#!”.
Enter "ESX!", and you should see "ESX0!", which indicates that the interface was switched
to the serial port (interface 0).
Note
The above message copied from PMC_Eight_ReferenceManual_ ReleaseXXX.pdf

Connect to Asiair：
1.Power on Asiair，Power on IEXOS100
2.connect Asiair with IEXOS100 by usb Micro-B
3.Open Asiair APP
4.Telescope Settings drop list choose Explore Scientific IEXOS100
5.Enjoy your Asiair with your IEXOS100

HPayne

@tech@zwo#42857
Thanks for your reply, however the procedure you describe is for connecting via serial port, I am looking for a wifi connection method between the PMC-8 and the asiair pro. Is that possible?