I am experiencing connectivity failure with my ASI1600mm-pro and an EAF.
I have operated these devices in the past, both from my laptop and PC, without issue. Connecting/communicating via their USB ports functioned as intended. I recently prepped my gear for imaging and both devices were entirely invisible to my computers - no devices detected in device manager/device tree viewer, and no detection from any software.
In terms of troubleshooting/context: Another camera, a ASI224MC, remains recognizable and operates without issue, making driver issues somewhat unlikely(?). In any case, updated ASCOM and started with fresh driver installations on both computers, + windows up to date, etc.
I own a second EAF, and I was able to get it to function.
I tested multiple USB cables with these devices to no avail
I confirmed that USB connectivity worked with other devices in various ports, and that my laptop could not disable these ports for power saving measures
Plugging devices into their 12v power supplies lights their red power lights
When plugged into the 1600mm's usb2.0 out port(s), my ZWO filter wheel initializes (shifts wheel to confirm proper alignment) *EFW is not, however, detected or operational when connected via the 1600mm *EFW connects/operates when connected directly to PC or hub, rather than through 1600mm.
I appreciate any and all help you all can offer. I'm at a loss for ideas and am losing hope for these devices working for me again :/