Hi community. I'm desparately trying to get the above setup working. Installed all the drivers for the ZWO120 from the website. No problem at all to connect to the camera and view the output in either ASI Studio or Sharp Cap, or PHD2. The ZWO is connected to my PC via USBC=>USB cable. The ZWO is connected to the Star Adventurer via an ST4 cable. The autoguiding doesn's work. It seems like the Star Adventurer is not reacting to any signals from PHD2. To double check I went to Tools/Manual Guide in PHD2. Clicked all directions, East/West with a 5000ms duration. Don't hear any movement from the Star Adventurer. Star Adventurer is switched on and operating in Star Mode. Online discussions suggested it might be the ST4 cable. I've tried two different ones, in particular the one that came with the camera. No luck. I've also installed everything on a second computer and Windows 10, still no reaction. Getting desparate now, would appreciate any help!
