Import of mosaic data from Telescopious rejected text format

Jeddymo51

Trying to do a mosaic of the Heart and Soul Nebula. Cannot get ASIAIR to import the Telescopius data. Says incorrect format. This is the data:
Pane, RA, DEC, Position Angle (East), Pane width (arcmins), Pane height (arcmins), Overlap, Row, Column
Center, 02hr 44' 33", 60º 47' 45", 15.40, 189.60, 128.40, 10%, -, -
Pane 1, 02hr 55' 39", 60º 23' 21", 17.81, 189.60, 128.40, 10%, 1, 1
Pane 2, 02hr 33' 10", 61º 08' 37", 12.91, 189.60, 128.40, 10%, 1, 2

Are there space problem?

Byrdsfan1948

Jeddymo51 Hi, I have exactly the same problem you describe, and get exactly the same error message you site. I can at least share with you a work around I came up, with that allows me to import that data. Hopefully it will work for you as well. From your post it appears that you have properly saved the necessary information from Telecopius to your clip board. However when you then hit IMPORT try to import that data to your ASIair you get that error message.
My work around: Do NOT hit the IMPORT tab on the ASIair at the window that your data should show up in. INSTEAD tap your finger within that window near the inside top a few times until another banner appears that will allow you to PASTE the information from your clip board into that window. Tap on PASTE. In my case that immediately imports the data from the clipboard and gets around this problem. Why I/we have this problem, and what makes my work around work, I have no idea, but I'm just an old Mechanical Engineer and all this computer stuff is a mystery to me. But at least give my work around a try and let me know if it works for you as well. Al

PMTeam@ZWO

Thank you guys, we will try to reproduce and fix it in the next update.