iOptron Tri-Pier Portable Pier Tripod 8034 and ZWO PE200for AM5

DeepD

Hi All,

I plan to buy iOptron Tri-Pier Portable Pier Tripod 8034 for my AM5 mount. After reading from ZWO AM5 FB groups, I found that, with the ZWO PE200 Pier Extension, I can directly put AM5 on iOptron Tri-Pier Portable Pier Tripod 8034 without the need for other adapters.

Is my understanding correct? Does anyone have experience with this Tri-Pier setup?

ASIMount@ZWO

Hi DeepD,
Yes, you are right.
Just image PE200(without silver adapter) as an Ioptron CEM40.

wress

ASIMount@ZWO

I have the older Tri-Per configured for the AZ Pro mount. Do I need the PE200 Pier Extension and a CEM40 top plate?

9X9kKM0e

ASIMount@ZWO Hi may you please let me know what size of screw and how many would I need to connect my ZWO 200mm Pier to the iOptron Tri-Pier [IOP-8034], I would like to buy another 200mm Pier for the iOptron Tri-Pier (it does fit natively right?) just need to know what screws I would need to buy to make this connection, thanks for your help,
we own 2 of the 200mm Piers already we love the quick release system, I have them on SW Tripod and I have 2 of the TC40 tripods, great products!

ASIMount-ZWO

Hi,please refer to the following information.
You need connect PE200 to iOptron Tripod with 2 M6-16 screws.