Problem with running on Linux

riklaunim

I was trying to run ASI120MM on oaCapture on Linux but it seems there is some problem when the ASI camera gets connected (dmesg):

usb 3-6: new high-speed USB device number 42 using xhci_hcd


 usb 3-6: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 1024
 usb 3-6: New USB device found, idVendor=03c3, idProduct=120a
 usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 usb 3-6: Product: ASI120MM
 usb 3-6: Manufacturer: ZWOptical company  
 usb 3-6: SerialNumber: 00000

usb usb3-port6: disabled by hub (EMI?), re-enabling...

oaCapture detects the camera but can't show any preview from it. That happened on Xubuntu 14.10 as well as some older Manjaro install.

Sam@ZWO

its seems the linux usb host is not compitable with the camera

you can flash the firmware to make it works

but compitable firmware is not as fast as the old one

anyway, you can flash it back. please do it on windows

http://zwoptical.com/software/FW%20Tool.zip

riklaunim

I'll check other PC USB controllers first ;)