Asiair plus and Canon 1000D

renardet83

Hello
I have some trouble to trigger an Canon 1000D cameta with the Asiair plus.
The camera is recognized when connected with the usb cable.
Iso and speed can be selected in camera bulb mode through Asiair but noway to trigger it an take a picture.
The cable works fine and was tested on the camera with lightroom previously.
Need some help.
Thanks

PMTeam@ZWO

renardet83 Hi. Please check the following settings to ensure the ASIAIR can control your DSLR successfully.
Mode: Manual Mode (M)
Drive Mode: Single Shooting
Shutter: Blub
Image Quality: Uncompressed RAW （Only）
Focus Mode: Manual Focus (MF)

If you do not use the shutter cable, you need to turn off [exp with shutter cable] in the app
Users of Sony cameras do not need to perform this step.

Recommended to Settings
Long Exposure NR - OFF
High ISO NR - OFF
SteadyShot - OFF
Bluetooth - OFF
Wi-Fi - OFF
Zebra Display - OFF
Bracketing- OFF
SD Card is plugged

We recommend that you try the above steps. If the problem persists, please take a screenshot and upload the log to us. Thank you.