EAF Pro re-focusing after each shot during autorun

magnetar68

I have used my new EAF Pro a few times in the past week. I have the temperature probe from my original EAF plugged into the Temp port. If I configure the EAF to re-focus after a 5 degree change in temperature, the EAF Pro refocuses after each individual shot instead. This is during an Autorun session. If I disable the temperature refocus, then it stops doing this.

The temperature looks stable inside the ASIAIR App, so there was not a 5 degree change of temperature after each shot.

Maybe a bad probe?

I am using it with an ASIAIR 2600MC Air.

rbrasi27

EAF AF repeating topic seems to be gathering momentum... check the CN discussion https://www.cloudynights.com/topic/971505-zwo-eaf-pro-battery-issues/
for some additional info...

cheers and CS, b

rbrasi27

It seems that using temperature based triggers to initiate AF is the not operating as it has; I was able to run a 4 hour session last night with AF initiation based on temperature turned off and with time settings (in my case, hourly); no problems arose and the repeating AF issue was avoided. This workaround is OK for my imaging plans but ZWO devs should provide a fix soonest - more serious temp variations will soon be upon us. Cheers and CS... b

6WZly1MM

EAF AF repeating topic seems to be gathering momentum... check the CN discussion https://www.cloudynights.com/topic/971505-zwo-eaf-pro-battery-issues/ Stickman Hook
for some additional info...

cheers and CS, b

I can't remember the extension. Though the battery has been corrected, a HUGE BUG STILL EXISTS: when using the battery with temp-based autofocus, IT REFOCUSES AFTER EVERY IMAGE!