EAF issues with Set Up interface in NINA

LcA9769w

I updated the drivers post-camera/CAA upgrade, and with that, the drivers for the EAF. Since then, the Setup control for the EAF access by the three cogs in NINA has been squashed and cannot be changed/read.

I wondered if the Firmware had gone bad, so I updated it, but there was no improvement.

If someone else has encountered this issue and solved it, your help would be greatly appreciated.

Richard

Tech@ZWO

1.Try stretching the option box
2.Uninstall the ASCOM driver and reinstall the latest version
3.Test the EAF connection in ASIStudio to check if it can be enabled.

LcA9769w

Morning,

Thanks for the feedback, I've now tested/followed all those options.

1.Try stretching the option box -

The box will not be stretched in any direction (the cursor doesn't change). Additionally, the drop-down menu doesn't allow you to maximise/minimise the window; however, the window does change if you adjust the zoom percentage.

2.Uninstall the ASCOM driver and reinstall the latest version

I completed this by updating the Ascom platform to version 7, deleting and reinstalling all Ascom drivers, and checking and resetting all the associated ports and settings required to reconnect everything. However, I did see that with the new Ascom, I can see the EAF controls and settings in the Ascom settings.

3.Test the EAF connection in ASIStudio to check if it can be enabled

Yes, I can check and change the setting in the ASI Studio - a good work, and this Thursday (clear skies, fingers crossed) I will try running an AF profile.

None of this helped with the strange situation of that settings box in NINA performing very strangely.

LcA9769w

Additionally, I replaced all the USB cables in the system with new, high-quality cables. It did not affect the issues.

I've also just updated the NINA software to the latest Beta (I was previously on the last stable release) - again without effect. I finally tried changing it directly on the machine in Question instead of via TeamViewer - no difference.

Your help would be appreciated.

Tech@ZWO

LcA9769w Can you test other ASCOM software? Or try using a different computer? At this point, it's unclear whether the issue stems from your firmware upgrade or the NINA device itself.