Controlling two S50 devices with the app on one tablet/smartphone

braunschweiger

I have two S50 devices and would naturally like to control them with one tablet/smartphone.

Unfortunately, currently you need a separate tablet/smartphone for each S50 device.

This is extremely cumbersome and expensive.

It would be really helpful if you could control two devices like the S50 with just one tablet/smartphone.

Could this be communicated to the software developers?

I think this is a major problem that makes the user experience extremely inconvenient.

Regards, Michael

marvindj

On a single device, you can switch to the unique wifi network of a given S50. The SS app will then be using that device. Switch to the other wifi network, and the app is controlling that device. Not very clean but quite manageable

braunschweiger

marvindj

This doesn't work.

Example:

Seestar-1 is connected to the Wi-Fi network via the app (iPad).

Now I want to connect Seestar-2 in the app.

And this doesn't work on the same iPad!

When I try to connect Seestar-2, it automatically reconnects to Seestar-1.

You always need two iPads if you want to operate two Seestar devices, which I find extremely inconvenient.

It would be desirable if you could switch between Seestar-1 and Seestar-2 in the app and then automatically switch to the Wi-Fi network.

marvindj

You need to switch your iPad's Wifi network to Seestar-2's wifi...then it will connect to SS-2 . This works. I do it all the time with S50 and S30..

Don't use Station mode. (Or, at a minimum, don't use station mode for both devices...)

braunschweiger

marvindj
Mit einem S30 + S50 soll es gehen.
Mit 2x S50 aber nicht.
Ich habe das jetzt mehrfach versucht....
Es geht nur wenn die Seestars (2x S50) nicht aktiv Fotos machen....