ASIAir station mode won't connect to Wifi

SyD7ltS5

Hi.
So I got an ASIAir Plus a little while ago, and decided to try out the station mode, in order to keep an eye on the sessions from in-door.
I have a TP-Link Deco x20 mesh router set up close by a window, and about 5 meters outside is my mount and ASIAir.
In the app, I try to connect the station mode to my home wifi, which is set to 2.4GHz. However, in the app, the ASI tries to authenticate for a few seconds before responding "unable to connect". In the app I can see the signal strength is reported to be full bars.
Any idea what to do? If the ASI can't even connect to the network, station mode is kinda useless...

AstroDude42

PMTeam@ZWO in regards to your IP conflict response, i wonder why someone should change their whole private IP address space? This feels totally wrong to me. ASIAir should just take the IP address that a router provides via DHCP. No matter the address space.

SyD7ltS5 please double check that your router provides IP addresses via DHCP and if so, that ASIAir automatically uses it and doesn’t (!) have a fixed IP address. The latter might prevent it from connecting to your WLAN.

Hth

PMTeam@ZWO

Hi, the "unable to connect" error in Station mode is typically due to one of two reasons:

IP Conflict: Please check if your home Wi-Fi (TP-Link Deco) is using the 10.0.0.x subnet. If so, please change it to a different subnet (e.g., 192.168.1.x).

Incorrect Password: Please double-check the Wi-Fi password you entered for any typos.

After making these adjustments, restart both your router and the ASIAir, then try connecting again.