Wireless connection stops after connecting camera

Hello!

I am a new user with a new camera (ZWO ASI 174MM cool) that arrived today.

First of all I must say that is a great camera.

Just making tests (it's daytime now) but I already see, that will have great times with it.

I am using the camera on a Intel Compute Stick HDMI A/2GB/W10.

A little piece of hardware glued on the mount.

Have spent a few hours to make it work right.

The problem was that when connected, the wifi network just stopped working without any message on the pc.

Everything looks right, but there is no network connection.

When I unplug the camera the network works again.

The solution was to limit the wireless mode to 802.11b

and also connect the camera only after system boot.

HI,

That's because of signal interference.

Here's an introduction to this：

https://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html

So,There is no good way to solve the problem.

first, please use other shielding better cables.

Second, keep the camera away from wifi.

Third, If it is possible to use USB2.0 instead of USB3.0 for you, please use usb2.0.

Fourth, If your wifi has 5G mode, use it instead of the current mode.

Five, use foil paper for some simple shielding.

Thanks

chad

Hi,

Thanks for the answer.

Have solved the problem with a wired connection.