Cabling for ASIair and HEQ5 pro

georgeastro23

I have just bought my ASIair unit and need a few suggestions and help setting it up to fit on my scope, my mount is a HEQ5 Pro and I intend to use it remotely using the Orion Starseek Wi-Fi module which plugs into the hand controller and using Starseek 5 software, the problem is how do I also connect the ASIair as this also needs to connect to the hand controller.

I also have a Hitecastro mount hub which powers all my needs as it has 8 12v dc connections and 4 continuous 12v supplies 4 USB ports and 4 dew

controller ports, this can be controlled from my laptop my is getting a power lead from the hub to the ASIair 12v- 5v power module.

Any help would be gratefully appreciated and any suggestions will be taken on board. Pictures included.

Thanks

IMG_1016.JPG

/IMG_1015.JPG

/IMG_1017.JPG

PMTeam@ZWO

Georgeastro23 wrote:

I have just bought my ASIair unit and need a few suggestions and help setting it up to fit on my scope, my mount is a HEQ5 Pro and I intend to use it remotely using the Orion Starseek Wi-Fi module which plugs into the hand controller and using Starseek 5 software, the problem is how do I also connect the ASIair as this also needs to connect to the hand controller.

I also have a Hitecastro mount hub which powers all my needs as it has 8 12v dc connections and 4 continuous 12v supplies 4 USB ports and 4 dew

controller ports, this can be controlled from my laptop my is getting a power lead from the hub to the ASIair 12v- 5v power module.

Any help would be gratefully appreciated and any suggestions will be taken on board. Pictures included.

Thanks

IMG_1016.JPG

/IMG_1015.JPG

/IMG_1017.JPG

Hi,

Take a look at this pic:

Now, ASIAIR only supports SynScan and EQMOD. With WiFi module only tested SkyWatcher AZ-GTi.

Based on your HEQ5 Pro, you can select SynScan(HC) or EQMOD.