EAF on the FCD100 Series 127mm f/7.5 Aluminum Air-Spaced Triplet ED APO Refractor with 2.5" HEX Focuser

gammerpc

Any way to Mount the EAF on the FCD100 Series 127mm f/7.5 Aluminum Air-Spaced Triplet ED APO Refractor with 2.5" HEX Focuser Telescope?

The Screws that come with it are to short to use and smaller than the ones that come the EAF.

Thanks

Larger Image https://live.staticflickr.com/65535/49713202468_5858461db0_k.jpg

Added: I found a way, all I really needed was 2 M4x20 Screws, M4x22 would have been better.

~~Thanks for a Great Product, NoDarkSkies~~

moson

Thank you very much for your support and sharing.

gammerpc

I got it working Great on the ES 102, ES127, but not on the ES 140.
If the Shaft was 14mm Diameter or less it would work great.
I did take the shaft adapter from the Pegasus Astro FocusCube 2 Focuser Motor and the EAF worked Great.

owenmolly0409

gammerpc I saw an older post where you attached the EAF to a Meade 70mm astrograph. I know you put it on the coarse side but which holes did you decide to use. I know the focuser lock hole can be used but what about the other two? I was a little leery to unscrew one of those. Thanks for any info you can give.

GM

GooE

Search for this scope and adapter on thingverse. There is a 3d print you can download for this very scope. I used it on mine, worked perfectly. Needed 25mm long screws from the hardware store though.