ASI drivers for Windows on ARM (ie Mac M1 Silicon): Page 5

ASI drivers for Windows on ARM (ie Mac M1 Silicon)

didier

Out of curiosity, which driver did you try ? (was it the one posted by @Tech@ZWO on april 23rd? ).
When I tried it I didn't run into any driver signature issues. Could you elaborate on why you did to deactivate the driver signature ?

thanks
-Didier

didier

Some progress:

in the device manager right click your camera
select 'update driver' and then 'browse my computer for drivers' (the search automatically doesn't detect anything for me)
manually select the folder "C:\Program Files (x86)\ZWO Design\ZWO_USB_Cameras_driver\driver\arm64" (notice that the driver gets installed into the x86 folder and not the arm folder)
click next and eventually you will get this:

Yes, there is an error but at least I found a way to at least try to associate the driver to the camera...

didier

Ok, so I did find out how to deactivate the driver signature and and and... it worked !!
My camera seems to be properly associated with the driver (I did reinstall the driver after reboot) and now sharpcap detects it.

here are the instructions I followed to deactivate the driver signature (I followed method 1):
https://www.prajwaldesai.com/disable-driver-signature-enforcement-in-windows-11

Going to try everything out tomorrow and see if everything works as expected. I'll report my findings here.

PeterH

sorry for not responding. I partly solved my issues (also deactivating the signature and starting Windows in Mode 7) but I still have the crash (USB/ Driver/ whatever...) and I also have artifacts ....

didier

PeterH hum...

the vertical line across could be explained if you ended up getting one of Elon's satellites while stacking (happened to me a few times... I usually remove it in post processing)
the horizontal misalignments... it's very odd. It's as if your entire setting had moved (multiple times) in the middle of capturing a single frame. I have never heard of this. So maybe there is an issue with the driver here. Which camera are you using ? (and does this happen every time or just on this one stack ?)

PeterH

didier

On my end, I am happy to report that everything worked properly. Drivers for my ASI294MC worked properly with parallels and sharpcap was able to properly capture/stack images.

Note that I had to redo the driver signature de-activation thing (reboot windows in recovery mode...)

But after that, everything worked as expected.

PeterH

I am working with the ASI2600MM Pro mono. I still do not believe that there is a hardware issue. I still believe in a kind of software error / read out error. I will now try to connect the camera to ASI Studio using my MacBook to see if there are also that artifacts.

###

Sharpcap: better / similar than NINA? no USB Issues?

thanks for a short response

Peter

PeterH

Today (because advised by ZWO support) I took hundreds of fits - all 5 and 10s frames. You will not believe it: not a single artifact (!) What did I change? I connected the ASI2600mono directly to my MacBook Pro M1 and used ASI Studio for shooting. I than tried the same using NINA and had also no Problems and not a single Artifact. o.k. that was under "lab conditions" and its impossible to shoot in the night because I will not leave my MacBook out there alone in cold and humidity ... but if it would be a serious issue with the camera, the errors should also have been triggered.

on one side I am glad that the camera is not guilty but on the other side the initiator of the issues is still out there.

Peter

Paulito Webb

Hello @Software@ZWO ,
super cool the driver works for my newly ASI462 camera running on a Parallel Windows ARM on a Macbook Pro M1.
It works very well!
Why ZWO do not officially release it?
regards,
Paolo

Tech@ZWO

Paulito Webb It still in beta, we will release it after more test.

TssoksfQ

Tech@ZWO how’s the testing going? Are we any closer to a release? Expected timeline?

Tech@ZWO

TssoksfQ Do not have an estimated date yet, we are still need to test it on M3

TssoksfQ

@"Tech@ZWO"thanks for the update

t7aRwZ08

Very interested in this update. Is there a way to get notified when it is ready?

Tech@ZWO

t7aRwZ08 We'll post a notice on the forum once it's ready

mj972

Tech@ZWO Just finished reading the entire thread - I Installed the ARM version on my M2 mac and it runs well under windows with driver signing turned off. Is there a way to receive a signed Beta version of the drivers?

« Previous Page Next Page »