AA Pro doesn't center the target

stubblejumper

It reports that it has the latest firmware v 1.9 (1.8 953?). I damaged the main board on my AA+ so reverted to the AA Pro. When I did a GoTo, the mount slewed and then stopped. It didn't report anything like Finished. That was odd so I rebooted AA Pro and had the same result. I decided to continue with the capture of the Crescent nebula. When I processed my subs, I wound up with an integrated image with zero nebulosity. I'm guessing there's a firmware problem somewhere and would appreciate suggestions for how to check and fix the problem. AA Pro worked fine when I used it some last last year

w7ay

stubblejumper how to check and fix the problem

If you want the ASIAIR to automatically center when your mount is not perfectly aligned to the sky, you need to enable the "GoTo Auto-Center" switch in Mount Settings.

Otherwise, just manually plate solve after the initial GoTo, tap on Sync And GoTo, rinse and repeat until you are satisfied with the error.

Chen

stubblejumper

Thanks Chen. I didn't know that I now had to turn on a feature. When I last used the AA Pro, it automatically platesolved when using GoTo.

Don