Installed EAF Firmware 3.3.3 and it is now bricked.

rimcrazy

I noticed there was a firmware upgrade this morning. I was on 3.2.3. I ran the upgrade on my Windows machine to upgrade to 3.3.3. It said the update finished correctly. Now my EAF is totally bricked. It will not move at all. First tried with my AA+ and no dice. I then just plugged a USB cord from my Jackery into it so it has +5vdc and used the hand controller. Nope. Will not move at all. Is there a way I can get the binary for 3.2.3? How do I fix this?

w7ay

rimcrazy Now my EAF is totally bricked. It will not move at all.

If it is not completely bricked, and ASIAIR can still connect to it, check the Max Step Limit in the Focuser Setting window -- see if it has been set by the new firmware, in ZWO's infinite wisdom, to zero. If so, change it to 65000 to get the maximum movement range.

Chen

rimcrazy

w7ay, you are the bomb. That was it. Good grief. Well you fix on of my problems. Thank you very much!

Tech@ZWO

Sorry for the trouble, we noticed this, and will optimize it in the future.