What resolution for full FPS ASI533MC?

rrbailey89

At what resolution should the camera be able to get full FPS? It seems to only get around 8FPS in my testing at max resolution and the 20FPS at 720p.

Tech@ZWO

rrbailey89
Which software did you use to test?
Please check the USB traffic, and increase it to 100% to try.

rrbailey89

I tried in both ASI Studio Planetary imaging and SharpCap. In SharpCap TurboUSB is set to 100.

What should the exposure be set to for testing? At 500ms in SharpCap it was getting less than 1 FPS in RAW16. In ASIStudio it was getting maybe 1 - 3 FPS.

In SharpCap when I lowered the exposure to 1ms it got 20FPS at max resolution, 54.2 at 1080p and 116FPS at 480p.

I am doing this testing point the camera at a wall in my home.

rrbailey89

As you can see here in ASIStudio at max resolution its getting less than 20FPS on USB3 at 40ms exposure.

And RAW16 it gets less than 10FPS.

I also am not sure which section applies to this camera 12bit or 10bit ADC.

Tech@ZWO

rrbailey89
Sorry, i attached the wrong table before, it's not for ASI533MC Pro.
This is the correct one:
Max FPS at full resolution:
14Bit ADC
3008×3008 19.88fps
1920×1080 54.11fps
1280×720 79.74fps
640×480 116.55ps
320×240 216.45fps

Please ensure the USB traffic here is 100%.