Direct Show Driver

Pitufo

I downloaded direct show driver from ZWO under this link below:

https://www.zwoastro.com/downloads/others

Scroll all the way down to the bottom, the last one.

RSpec is here downloadable under request for trial version:

https://www.rspec-astro.com/setupdownload/

Best regards,

Martin

Tech@ZWO

Pitufo Got it, i will test it asap.

Pitufo

Tech@ZWO asap

Thank you!

Best regards.

Martin

Pitufo

![Well today I've been testing the ASI432MM together with Direct Show Driver downloadable ZWO website.
It's been working no difficulties, but my ASI120MM-S still does not run under Direct Show Driver.
Both cameras, ASI432MM, ASI120MM-S, are working in Firecapture, ASISTUDIO as on ASIAIR.
All my other cameras are working also with Direct Show Driver: the ASI120MC-S, ASI120MMmini, ASI533MCPro.

But just the ASI120MM-S does not work with Direct Show Driver!

Truly spoken there must be something wrong with the Driver in the Software.

Clear skies,

Martin

Tech@ZWO

Pitufo I reproduced the problem you said, and our devs are working on it.
I will tell you if there is any updates.

Pitufo

Hi,
I tried several times to delete the software Direct Show Driver completely, Restart PC and download a fresh version from your page. It won't correct the bug.
I tested it on two PC's. I got no clue about it.
The strange thing is that all my cameras including the ASI120MM-S are running perfectly on PC with ASIStudio, Firecapture as well with ASIAIRPro.
It is just the ASI120MM-S which does not run with Direct Show Driver.
Anything else never had issues with all my ZWO cams.

I got installed all necessary drivers for ASCOM, Windows and the Drivers for ASIStudio.

I contacted directly over the help link in Direct Show Drivers the webmaster@noeld.com, which replied me following,
Quote:
Version 9.01 is very old and one of the first version ever released, it is not supported any more. Please test drive the free demo version 9.23 at http://noeld.com.

Strange is that the Direct Show Driver after installing is called AMCAP, and the answer from the gentleman above.

Iv'e got no clue whats going wrong.

Clears skies,

Martin

Tech@ZWO

Pitufo Thank you for your information, I tested it and have the same problem as yours.
Our devs is looking into this, and expected to have the result within this week.

Tech@ZWO

Pitufo Hi Pitufo,
Our devs made a test version, and I just tested it on my computer, it works fine, would you like to test it at your end to see if the problem is solved?
This is the download link: https://drive.google.com/file/d/1dCIEgI9Zj37f8CJBqW1RqDncABAhUIby/view?usp=sharing
Just in case, I set the access permission.
Thanks.

Pitufo

Tech@ZWO

Hi,

I cannot download this file, please could you send me the access permission?
Thanks.

Tech@ZWO

Pitufo Approved, please try again. thanks.

Pitufo

Hi,

I can happily confirm you that with the test version ZWO_ASI_Cameras_DirectShow_driver_Setup_V3.30.1 the ASI120MM-S works alone with AMcap, or together with RSpec.

The problem is solved, thank you very much for your support.

Clear skies,

Martin

Tech@ZWO

Pitufo Great, we will update it on the official web as soon as possible.
Thank you very much for your test.