ASIAIR v2.1.2 has been released!: Page 3

ASIAIR v2.1.2 has been released!

Corsair

DeepSkyOne
Look at this post
https://www.cloudynights.com/topic/867572-asiair-app-previous-version-apk-downloads-available/

You'll need to reset the firmware on the ASIAIR Plus first this way:
https://bbs.zwoastro.com/d/15600-zwo-asi-air-plus-backup/5

PMTeam@ZWO

Madman117 1 Turn on Station mode in ASIAIR
2 Select the Wi-Fi of the Vixen Wireless Unit as the STA Wi-Fi
3 After the bridge is successfully connected, open the app mount settings and select Vixen Wireless Unit to connect.

Bonzer2u

PMTeam@ZWO

Is it possible to connect both the asiair and vixen mount in STA mode to your home wifi router for increased range.
I currently run my AA+ in STA mode to my home wifi router but my CEM26 mount in connected to my asiair via usb cable.
(the difference being the vixen would connect via wifi as well)?
In my current configuration, I can control my mount/scope from a significantly increased distance away from my setup.
Thx.

Madman117

PMTeam@ZWO
Thank you 🙂

PMTeam@ZWO

cterry Thanks for feedback.
Noted

PMTeam@ZWO

Baxyp The orientation filter will take effect together with the time filter.
For example, you choose: 19:00-20:00 South
This means that ASIAIR will select celestial objects that appeared in the south direction between 19:00-20:00

But the direction information in the list refers to the direction of the current celestial body.

Baxyp

PMTeam@ZWO I see. Still, at least for me, filter’s N/S directions are reversed. I just tried it out again and set time filter to approx current time. Then it is easy to see in the list, where object’s direction arrow points and compare it to the direction filter.

PMTeam@ZWO

Jan75 Thanks for feedback. Sorry it was our mistake. We are doing some preparatory work before multi-language translation for asiair, which requires redefining all the copywriting of the app. In the process of redefining, we entered the wrong word.

DeepSkyOne

[unknown]

Thank you very much.

DeepSkyOne

[unknown]

Thank you very much.

JPB37

Bonjour
Serait-il possible de programmer une remontée en température de la caméra à la fin de la session, sur environ 10/15 mn, avant que l'ASIAIR ne se coupe.
J'ai eu des échos comme quoi une coupure du refroidissement pouvait être néfaste à la caméra, surtout lors de session pendant les nuits d'été.

L5rEAosd

I'm getting "exposure failure" every time I do a preview. If I do a "slide to restart" it worked again. But, I did nothing else?

What does this NEW message mean?

PMTeam@ZWO

L5rEAosd Hi, based on your description, guesses are related to the following reasons:
1 The power supply voltage may be insufficient. You can check whether the voltage value displayed on the ASIAIR app is normal (12V Power Port for Camera) when shooting. If the voltage is abnormal, please try to replace the 12V DC cable or power adapter
2 USB 3.0 cable problem. Please try to replace the USB3.0 data cable.
If you still can't solve it, please submit a log after occurring the problem. We'll help you troubleshoot the issue by checking the logs. Thank you so much

Arthur Hucksake

Dear All.
This new update changes my Long/Lat to somewhere in China. I live in London England. I am unable to slew to any target in the database. I can see the constellation overhead, and I get a msg station item is beneath the horizon. I have re-entered my co-ordinate a dozen times, it keeps changing them back to China.

RobinS

Gandalf000
Happening to me, too. I was particularly irritated the other night when I wanted to get a picture before the clouds rolled in. I know it was less than a minute's delay, but so often that minute is needed!

Lumine

Since the update of the ASI AIR app (V2.1.2), I am unable to connect the AM5 to the AAM without a USB cable, wireless connection failed.
I'm using IOS.
Has anyone had the same experience, or does anyone know how to solve the problem?

Masslessparticle

@PMTeam@ZWO The new firmware has stopped working with my Sony A7R IV. I’m using the same camera settings and cables as before. Is there a way to rollback to the working firmware version on iOS?

Steps to reproduce:

power on the AsiAir Plus with no camera attached
attach the camera
the camera displays ‘pc’ indicating it’s being controlled by a computer
enabled the camera in the AsiAir app

Result:
The camera no longer displays ‘pc’ and the AsiAir cannot control it. (See the empty iso dropdown in the menu). Trying to take a preview picture results in ‘exposure failed’ message

Expected result:
The camera works as before

Masslessparticle

Masslessparticle I was able to rollback the firmware by using an iPad with an older version of the app and the camera works again

Corsair

Masslessparticle
Hey PMTeam@ZWO @Tech@ZWO have you looked into this Sony Camera issue with the new firmware?

johnpd

Masslessparticle

That's interesting. I did not think that was possible. I know when you update the app and then start the ASIAIR, it automatically updates the firmware to match the app. Apparently according to what you did, if you go back to a previous version on another iOS device, it then matches the firmware on the ASIAIR to the old app version. Apparently the firmware upgrade is embedded in the app because you would not necessarily have Internet access at that point to downloaded it from ZWO.

Unfortunately, you can't use the original iPad. else it will update back to the latest version. It would be nice if ZWO would allow rollback to the previous IOS version so we could restore in case a crippling issue occurs with a new update.

JohnD

Masslessparticle

johnpd

johnpd I also had to take the extra step of resetting the AsiAir to factory defaults, otherwise the old app recognizes it is trying to connect to a newer firmware.

I’ve turned off auto updates on the iPad so hopefully this keeps me imaging until the firmware is sorted.

Sheldonator

Hello, with the new release I have tried to connect my Nikon Z fc to the Asiair Plus with the settings suggested by Asiair. The camera is also recognized, but as soon as I start the exposure (in preview or also in live mode) an exposure error is reported. I have tested 3 different cables (USB-A to USB-C), unfortunately no change. With my Nikon Z50, this has been working with the new release with good results.

I have a second question. Is it possible to use the Nikon Z fc or the Nikon Z50 in video mode for planetary photography with the Asiair? The field for video mode does not appear on either camera.
 
I would like to use the Nikon Z fc as it can charge the battery via the USB-C interface.

Many thanks for your help! With best regards, Nikolaus

« Previous Page Next Page »