ASIAIR v2.1.4 Public Beta Released!

raurgo

How can I access the Beta version?

DBullard

Any chance of adding the ability to cancel an exposure in process from the “celestial library”

Its really frustrating when I’m trying to frame and switch targets and when I press goto it just says cant goto, exposure in process forcing me to leave the library, cancel the exposure , return to the library and find the target again…

A “Cancel Exposure” button would save a lot of frustration…

MikeThun

Where can we download the Beta?

L5rEAosd

https://www.pgyer.com/air_beta_android

MikeThun

No, that link doesn't work

dcashel

MikeThun I downloaded the TestFlight app to my iPad and it allowed me to download the 2.1.4 beta.

Kroy

Hello good
Sky Atlas Version 1.15
Asiair Version 212 11.01

Mount 1.3.7 - Controller 2.4

To this day on my iPhone the "BLUE DOT" continues to disappear starting at "00" hours.
Any solution or does it need to be updated?

Thank you

Jsokal

Kroy Read the list of changes.

dickson

What is the minimum Android version required for the ASIAIR v2.1.4?

dcashel

I did a little bit of testing with the 2.1.4 Beta. Looks like the Canon T3i (600D) dslr bayer issue has been fixed. The asiair fit files sizes for my camera are back to the correct 5202 X 3465.

SFj9LuNr

Decided to give my ASIAir Plus 256 another go tonight hoping in the last two months since I used it maybe ZWO and Celestron came up with a fix for mount disconnect errors but unfortunately during a Live session on the second 3 minute image a "mount disconnected" error popped up. Guiding was doing so well on my AVX too. Guiding stops, but ASIAir is still taking the current image.

Tech@ZWO

SFj9LuNr The new version Celestron firmware HC:GEM 5.35.3175 should fix this problem.
Did you try that?

JSTAR0057

PMTeam@ZWO so where do I go to download the beta? I can’t find it.

Corsair

JSTAR0057
For Android it's here: https://www.pgyer.com/air_beta_android

For iOS you need to install the TestFlight App from the App Store.

SFj9LuNr

Tech@ZWO
I had this update before the last time I tested my ASIAir.

hyiger

This update ruined my night out (my fault for installing it before testing it at home). Guiding screen was broken. The screen was black when looping even though the gain was cranked up and the exposure set to 2s. It wasn't an issue with the camera (ASI174MM) because I set it as the main camera and was able to get a decent number of stars with a 0.5 exposure in preview mode. I rebooted the air and I could briefly see stars when looping before it went black again.

Also on the guide camera setup screen it was spelled: "Giude Camera"

w7ay

hyiger The screen was black when looping

Check the dark frame option for guide camera?

Chen

Hara

hyiger

Totally your own fault. Why on earth you download and install BETA version and do not test it before actual picture taking? Stupid thing to do and you are the only one to be blamed. Never do that. You always must have a possibility and time after testing to roll back to earlier working version if the BETA version do not work. If you don't understand that, you should stay in official releases, you are not suitable person for beta testing.

Tech@ZWO

hyiger
What is the gain value of the guide camera settings? increase the gain value to try and could you take a screenshot and share here? thanks.

artem
What is th model of your camera? and what is the gain value of the guide camera settings? increase the gain value to try and could you take a screenshot and share here? thanks.

artem

Good morning, I had the same issue with guiding with the BETA ASIAIR [V2.1.4 - 11.06], the guide screen on my IOS IPAD was almost dark/black and the stars were saturated, I did then finally deactivate the DARK FRAME OPTION for the guider camera and ´restart again the ASIAIR only then the screen did look much better, I will not use the DARK LIBRARY / OPTION for the GUIDER CAMERA anymore..

Good luck to all
Martin