ASIAIR v1.9 is out for public testing: Page 3

ASIAIR v1.9 is out for public testing

PMTeam@ZWO

AstroDude42 OK, I'll share your suggestions with the team. 🙂

AstroDude42

@asiair@zwo#54941 aweome! thanks 😃

Rob62

On a sudden my Nikon D5200 is not recognised anymore by the app, whatever I do. Any suggestions? The camera itself is functioning normal and perfectly. The cables are still attached and good.

PMTeam@ZWO

Rob62 Hello, please check the EXP with Shutter Release Cable of Main-Camera-Settings is turn off.

matt s

@asiair@zwo#54940
Hey ZWO
Just hanging out using an older, but serviceable, version of the AAP firmware, waiting for you to fix the calibration issue I, and others, have reported…

…will version 1.9 fix it? Hope so as I love this product…when it works!
Clear skies
Matt S

Kring

Found a small bug, if you accidentally disconnect the main camera which has a guide camera connected to its USB, when you plug in the camera again the main camera settings see both cameras as I would expect, but the guide camera settings no longer see the guide cam, they only see the main camera. I have to kill the iOS app by exiting and swiping up to kill it then launch again to see all both cameras again under guide settings.

PMTeam@ZWO

Kring Thanks for the feedback, we have tried to fix this issue. The next public testing version will be released include it. Then you can download and try it. Clear skies~

Kring

Found another bug in build 29, the CGX mount had trouble connecting, I purposefully disabled & disconnected the mount to reset it, then when I connected to USB HC again, and turned it on in ASIAir it wasn’t found. I had to turn on and off a few times to get it to recognize. I got a strange error I never saw before that said something like “do a polar and 3-star alignment first”

strange, but when it finally detected the telescope again I got the normal “do quick align and hit Ok”

PMTeam@ZWO

Kring We checked the log, the log showed that the equatorial mount device was plugged in at 22:40:08, and then it was connected normally.
How do you power the mount? You can try connecting a separate power supply to it. Clear skies~

PMTeam@ZWO

@matt s#54960 Hi, We are following this issue. Clear skies~

eaglesnumberone

Tried the build from a couple of nights ago. I'm having significant connectivity issues when I try to connect in the app. It's never been great, but as soon as I click "connect", it'll now often fail with a spinner that runs for a few minutes and then asks me to reboot the ipad or reset the wireless on the ipad. Earlier builds seem to be fine.

PMTeam@ZWO

eaglesnumberone Hello, I'll feed back your questions to the team. Could you submit the log after reconnecting, or provide the screen video? Thank you very much

madrobby

Feature request: enable support for M1 Macs. The iPad version should basically run out of the box.

PMTeam@ZWO

madrobby Hi, Great idea. Team will research for it~

keramos

@asiair@zwo Hi, I wasn't able to use the ASI174MM USB 3.0 camera as guide cam with beta 1.9 build 32.

To focus on stars I selected it as main camera but would result in exposure failure details are here:
https://bbs.astronomy-imaging-camera.com/d/14148-exposure-failure-with-asi174mm-usb-30-camera

I've submitted logs via the app, would appreciate some help.

Thanks.

Kring

keramos exposure failures are almost always USB cable related. Try a new quality cable. I have the 174MM and have had no issues testing beta multiple nights.

PMTeam@ZWO

keramos Hello, could you provide the email you filled in when sending the log? Thank you very much!

madrobby

When I pause auto run, then reset progress and reordering the auto run sequence, the new order doesn’t get applied when I start auto run again.

You see this here, it’s shooting but not starting with the bias frames but with the previous thing that was in first position before reordering.

PMTeam@ZWO

madrobby Thanks for the feedback, it seems to be related to a known problem we encountered. We'll try to fix it. At that time, you can try whether the official version will encounter this problem. We would appreciate it if you could provide a video or log when it reappears.

Ekato

The developer removed you from the test program.
Why???

« Previous Page Next Page »