ASIAIR v2.0 Public Beta Released: Page 3

ASIAIR v2.0 Public Beta Released

crackout

We need a function to save a view in SkyAtlas to the favourites.
Choosing a view, GoTo and then save using "current position of mount" via the preview screen is cumbersome.

PMTeam@ZWO

crackout Noted

stbkaiser

chrisastro
I saw a similar issue when I was connecting with my Canon EOS RA.
At first the default time was 300. It would not let me type in a value.
The dropdown box only allowed fixed times up to 30sec.
This was with the camera in the M mode.
When I changed the camera to B mode , then it allowed me to type in any value in secs.
and I no longer got the msg "“Exposure should be between 0.000032s-0s”..

stbkaiser

I am trying to run a plan without the system trying
to auto center on the object. I turned off the
"goto auto center" under the MOUNT
SETTINGS but the plan still takes a picture and
tries to auto center. Is there a different way to
disable auto center in plan execution?

stbkaiser

OK
according to one comment, there is a way to change the DISPLAY settings in the ASIAIRR APP on my I pad
zhongchun ji said
You can go to ASIAIR - Personalize Settings to enlarge the display to 125% or 150%

I can't seem to find the Personalize Settings screen .
Any Help on this
Thanks

w7ay

stbkaiser I can't seem to find the Personalize Settings screen .

ASIAIR Settings window > Personalized Settings.

Chen

Scenic_Observatory

I tried to do a 4 panel mosaic last night with the 2.0 beta and it would not start the Plan. I'm running a IOS iPad Pro. ASIAir Pro, with 533MC and EAF installed on an AVX mount.

Selected the 4 panels in Sky Atlas, imported them to the plan, selected start now. Pressed button to start the plan and nothing it just sat there. It should've moved to the first panel, ran the EAF sequence and starting imaging. Tried setting a start time, again nothing. Gave up.

Ran an Autorun sequence just fine after giving up.

Is this a bug or just me doing something wrong?

Eriktim82

Scenic_Observatory did you set exposure and how many images?

viperduude

Scenic_Observatory I tried Plan Mode on my iPad Pro and my iPhone. The plan would not start on either. Plan mode did not work in 1.9 either.

PMTeam@ZWO

Scenic_Observatory Could you share your plan csv here?

entreplume

@ASIAIR@ZWO#58558
Hello, no news about install on M series Mac. Thanks

PMTeam@ZWO

entreplume We test on our M1 and M2 Macs successfully. Any installation issue there?

franco

Several people have mentioned this and it has happened to me a few times.
Last night I shot a video of Saturn which I then stacked. I then slew to Jupiter and took a video, after saving the video I went to stack it and it wasn't there. Tried a few more times before I checked the video settings and found it had changed to mp4 output instead of avi. This apparent bug isn't new to this beta release.

Plus I've given up trying to use the autofocuser. I still run it but make my own estimate of where the bottom of the curve is, the point automatically selected seems way off.

Scenic_Observatory

Eriktim82 Yes, exposure, # of images on each segment of the plan. Tried again last night with a different plan, still nothing.

Eriktim82

Scenic_Observatory did it work before the 2.0 beta?

Send bug report and roll back the beta to the previous working firmware.

viperduude

Please add an option to enter a filter designation in custom filename. When shooting with a filter drawer and monochrome camera we need to differentiate between filters. But this option only happens when using a filter wheel.

Scenic_Observatory

@ASIAIR@ZWO#58892 the plan was generated in V2.0, so I didn't download the CSV.

jquitadamo

Is there a projected date for when v2.0 will be ready for public release?

Thanks,
Jason

joshkovach

@ASIAIR@ZWO#58893 I just tried to install this on my 2021 M1 Mac through TestFlight, and it still says it's only testable on iOS.

entreplume

joshkovach @ASIAIR@ZWO i have the same screen (in french 😄 ) and i don't can install the beta.
Thanks for reply

entreplume

@ASIAIR@ZWO#58893 no possible to install. The same of joshkovach . I have no probleme with the 1.9.2 final.
Thanks

w7ay

joshkovach it still says it's only testable on iOS.

That is weird. I just yesterday updated the v2.0.0 Beta to Build 48 on both a M1 MacBook Pro and an M1 Mac Studio Ultra, both running Monterey 12.6.

I notice that the ASIAIR app is listed as "iOS Only Apps" in the left hand panel (where other Beta apps will be listed) of your TestFlight window. With mine it says simply "Apps":

You might try re-downloading (or updating) the TestFlight app on the Mac (from the App Store.app on the Mac) to see if it does anything.

Chen

« Previous Page Next Page »