ASIAIR v2.1.2 has been released!: Page 5

ASIAIR v2.1.2 has been released!

L5rEAosd

SF3Zd52D
www.pgyer.com/air_test is the android version. Not sure on iOSPad?
Found it:
To join the ASIAIR beta, open the link on your iPhone, iPad, or Mac after you install TestFlight.
Chuck

SF3Zd52D

L5rEAosd I need the version for iPad - iOS

Corsair

SF3Zd52D

As they said - install the TestFlight app to get access to the Beta on iPhone and iPad.

https://testflight.apple.com/join/6uEyoSl3

For those wondering about Android it's here:

https://pgyer.com/air_beta_android

These links are published in the first post iof the 2.1.2 beta thread here:

https://bbs.zwoastro.com/d/17089-asiair-v212-public-beta-released

L5rEAosd

Yes, and I have downloaded the Android version of 2.1.3 which works as I said. But the test flight current version is 2.1.2; NOT 2.1.3. So, I'm still waiting for relief from 2.1.2 on iOSPAD.

Thanks

Tech@ZWO

nicolas

dcashel
Thank you for your feedback and test, We noticed this problem and working on this.
I will tell you if there is any updates.

dcashel

Tech@ZWO do you have any idea when the canon dslr bug will be fixed. My equipment is currently useless and has not been working for 1 month (ie ever since I upgraded to 2.1.2)

dcashel

Tech@ZWO

I tested the ios beta release 2.1.4 (11.05) and the issue still exists on the Canon 600D/T3i. Do you know when this will be fixed since I can not use my setup until this issue is fixed. Thanks…

Tech@ZWO

madpierrot Refer to this to try.
https://www.yuque.com/zwopkb/asiair/lf7nd44fruq3vukh

caradou

Tech@ZWO I have the same issue with sony a1 and a7rv i was following all the beta, and it never worked.
I followed all the tutos or sony configuration you were sharing, and same issue. I was never able to use my asiair from day 1 🙁

賴小熊

Can download Beta 2.1.4 from Testflight for iOS device

L5rEAosd

Test flight wants a redeem code??? Didn't receive one.

minimoto71

L5rEAosd Go to the 2.1.2 forum, select the iOS beta link for TestFlight and it will offer you the 2.1.4 beta version ( of course you need TestFlight installed in your device previously ).

賴小熊

Yesterday, I can download 2.1.4-420 beta from Testflight, however, I can't see this beta in Testflight now. But Andriod version is still available.

Tech@ZWO

caradou Can not connect or others? Could you please take a video to record the connection progress and submit the log in the ASIAIR app for us to analyze?
You also can directly contact ying.tang@zwoptical.com for more support, thanks.

caradou

Tech@ZWO It's showing the same than what was described here:
Of course, i'm on Manual, Bulb (trying as well 30sec), i tried with and without shutter cable, using Uncompressed Raw, Bracket is set to 0 and all the other parameters (like zebra off,pc connect etc..)
i reset my camera (both a1 and a7rV), i disconnected the camera, and connected to the asiair only when it's started. And it's always the same popup that appears.
I will send you a video, do you need something else? Thank you

caradou

Tech@ZWO I just sent you an email with a video showing my configuration and what errors do i have and how i'm connecting to the asiair.

sompi68

Hi amateur astronomers, last night I finally found a good evening to try the new update on my android tablet. I noticed that when centering a certain object, at the time of automatic centering, the blue cross and the red cross never match but are slightly staggered. Furthermore, objects on the map are blurry and there are misleading lines. Another problem is with my ASI 2600 MC PRO. Last night after 3 exposures of 300 seconds the M51 galaxy was grainy and with a watercolor effect, you can help me with the setting to have photos worthy of the name, I would like to point out that I have a C9.25, a CGX and an ED62 as a guide. Thank you in advance

L5rEAosd

Last night, I tried 2.1.3, 11.05fw. Using a ASI585 camera, I got the dreaded "exposure failure"! Just like I did with 2.1.2, 11.01. I did a soft restart from within the AIR Plus 256; it seemed ok. Then, I started my planned autorun. Exposure 1 & 2 ok. Exposure 3, the image capture but would NOT tramsfer to the Android tab. I pushed "pause" and got the autorun to restart and exposure 4 was OK. Exposure 3 was trailed. Then exposure 5 stalled again. Restried paused and exposure 6 failed again with NO images transferred to the TAB.
This morning I Reinstalled 2.1.3 and fw 11.01 and it appears the APP is OK like 2 days ago.
I then went to the gpyer site and see that 2 hours ago. Update 2.2 was released with Firmware 1093/1105/4003 notation; whatever that means.
Appears ZWO corrected 2.1.4 and released 2.2 ???????????? Don't know what "testflight" show??????
I will test 2.2 today for US and let you know!!!!!!!!!!! Nice to be retired in AZ.

L5rEAosd

minimoto71 See post above yours from me. 2.1.4 does NOT work for me. So, NOT needed. Thank you

minimoto71

L5rEAosd Sorry to hear that. Working fine here, but I don't know why they haven't open the 2.1.4 beta forum yet. Hope you can solve your issues.

artem

It is still unknown! WHICH FIXES WERE PUBLISHED WITH 2.1.4 ?? does anyone know?
since my question to ZWO ADMIN TEAM @Tech@ZWO is still unresponded..

https://bbs.zwoastro.com/d/17089-asiair-v212-public-beta-released/279
Regards
Martin

Kevin_A

It would be nice to know which bug fixes I am going to look at/check while testing v2.1.4 TestFlight!
Cheers!

artem

Kevin_A

Good luck Kevin_A, where I am situated it is raining and cloudy..
Regards
Martin

L5rEAosd

I tested Android version 2.2_0403 11.05 tonight. I was using AIR Plus 256 unit. Here's what happened.
Started normally, all devices found: AM5 mount, EAF, ASI585 osc camera, ASI220 mm camera, Edge 8, WO 200 and USB memory stick. PA to 33". Slewed to M81 and centered. Tried to "solve" and sinc; but, NO response. Repeatedly. Guiding calibrated to about .30 and started normally. Set Auto Run to 2 min for 45 exposures. Dithered each 10. Set eMMC as repository of images. Set refocus for 1 deg C change. Started AR. For 36 exposures, No issues; 2 dithers and 2 refocuses..
Then no 37 wouldn't transfer from camera to memmory for an abnormal of time, but did finally. 38 & 39 appeared normal. No 40 imaged but wouldn"t transfer. I waited 5 min about and shut it down... It was at the meridan.
Sorry for the long text.
Edit:: Although it didn't display that the images transferred; they were all there?????????

« Previous Page Next Page »