ASIAIR v2.2.2 has been released!: Page 6

ASIAIR v2.2.2 has been released!

nightsky54

[unknown] I want to point out, that the angle refresh issue is not specific to Android but also to iOS - and STILL exists there (was temporarily solved in intermediate releases though).

DrJ

Is anyone else unable to get grid lines on planetarium?

Also, I am trying to resolve a 'No Response 17' error on my Celestron that began when this upgrade was issues. Folks on Cloudy Nights forum think this is related to a ground loop issue between the Air and the Hand Controller.

Swizerlan

DrJ it likely is, you need a usb ground loop isolator. They are less than $20

Lewisite

I cant find the flat field auto exposure value copy for taking dark flats. Whats the process to copy the exposure value? Perhaps a future update can include dark flats option based on flats under the autorun?

brazzo229

Click on exposure Time and on the far left you will see the time of the flats

CS Sascha

Lewisite

brazzo229 Thank you!!!

Bibi64

jgoldsmith from last update I have a lot of problem, my A6000 often don't transfer data to Tablet, the Asiar plus sometimes do restart, and last but not least, go-to does not work!!! I'm sad...

DDivoAstro

w7ay : I’m trying the new beta version: WIFI problems have disappeared 👍🏼 The AA hotspot is back, displaying its default name ASIAIR_xxxxxx, or a custom name and password. That's good news.
The scope is imaging, no problem and the application seems to be much faster when reconnecting to AA.
To be seen tomorrow morning...

I like the new “apply” button that lets you adjust an object's FOV in Plan.

retman

DDivoAstro are you running iOS version? (if Android where did you download??)
thanks

DDivoAstro

retman : I use iOS/iPadOS/macOS. I downloaded ASIair app v2.3 with TestFlight.

StarMedic

DDivoAstro link? I only see 2.2.2 in TF

wvreeven

w7ay Any way to manually set a filter name in this beta version?

w7ay

wvreeven Any way to manually set a filter name in this beta version?

Not that I know, Wouter.

I disconnected the EFW (which of course allows filter names as before), and there is nothing in the Main camera setup re manual filter. The Filter Wheel setup is also non-functional when no filter wheel is connected. AutoRun does not have any Filter setup either.

Chen

Bibi64

AstroJym I have the same issues, i m going mad...

astrometrycs

Maybe this could help some: I managed to solve the 2.2.2 issues I had by doing the FW reset on my AsiAir mini and changing from iOS to android. I set up an android device with 2.2.1 apk. When starting up it installed the 2.2.1 on the air and it works, I can directly connect wireless again.
I'll pass on updates in future, be it official beta or inofficial beta (release)

deckblad

Excitedly hoping you release a firmware that works. Station mode doesn't work. Same as many others have said. I also can't figure out how to do a full reset of the ASIAIR Mini. I have yet to figure out how to make it forget current settings. It has my wifi password saved and I can't get it to reset.

I tried back loading 2.2.1 and 2.1.5. Those don't work either. They also don't clear the existing settings for the first station mode wifi AP I set up.

Swizerlan

w7ay looks like the rotator is coming. They should give it the ability to mechanically adjust tilt too

deckblad

I found the Android beta release site here.

https://www.pgyer.com/c40743d6504d85159f65829f6dfd4ae4

Unfortunately, the newest version 2.3_1025 still doesn't fully load when in Station mode.

I can see the device when scanning. But, the green dot circle spins forever with no results after clicking on connect.

I don't like that the alternative is to get the more expensive ASIAIR Pro to circumvent bad wifi support.

TomasK

Upgraded 2.2.1 to 2.3 yesterday
Shooting all night from about 9:30PM to 05:00AM
No issues at all - meridian flip ok, refocus on filters, guiding calibration after flip... all OK
Had saved targets so I had no time to play with Atlas changes - saw new rectangle there. But basic functionality is just fine in my case on iOS

StarMedic

TomasK where? Testflight still says 2.2.2 on my phone.

StarMedic

w7ay I only see 2.2.2 betas. How did you get 2.3 to show up?

« Previous Page Next Page »