ASIAIR v2.2.2 has been released!: Page 6

ASIAIR v2.2.2 has been released!

retman

DDivoAstro are you running iOS version? (if Android where did you download??)
thanks

DDivoAstro

retman : I use iOS/iPadOS/macOS. I downloaded ASIair app v2.3 with TestFlight.

StarMedic

DDivoAstro link? I only see 2.2.2 in TF

wvreeven

w7ay Any way to manually set a filter name in this beta version?

w7ay

wvreeven Any way to manually set a filter name in this beta version?

Not that I know, Wouter.

I disconnected the EFW (which of course allows filter names as before), and there is nothing in the Main camera setup re manual filter. The Filter Wheel setup is also non-functional when no filter wheel is connected. AutoRun does not have any Filter setup either.

Chen

Bibi64

AstroJym I have the same issues, i m going mad...

astrometrycs

Maybe this could help some: I managed to solve the 2.2.2 issues I had by doing the FW reset on my AsiAir mini and changing from iOS to android. I set up an android device with 2.2.1 apk. When starting up it installed the 2.2.1 on the air and it works, I can directly connect wireless again.
I'll pass on updates in future, be it official beta or inofficial beta (release)

deckblad

Excitedly hoping you release a firmware that works. Station mode doesn't work. Same as many others have said. I also can't figure out how to do a full reset of the ASIAIR Mini. I have yet to figure out how to make it forget current settings. It has my wifi password saved and I can't get it to reset.

I tried back loading 2.2.1 and 2.1.5. Those don't work either. They also don't clear the existing settings for the first station mode wifi AP I set up.

Swizerlan

w7ay looks like the rotator is coming. They should give it the ability to mechanically adjust tilt too

Swizerlan

DrJ it likely is, you need a usb ground loop isolator. They are less than $20

deckblad

I found the Android beta release site here.

https://www.pgyer.com/c40743d6504d85159f65829f6dfd4ae4

Unfortunately, the newest version 2.3_1025 still doesn't fully load when in Station mode.

I can see the device when scanning. But, the green dot circle spins forever with no results after clicking on connect.

I don't like that the alternative is to get the more expensive ASIAIR Pro to circumvent bad wifi support.

TomasK

Upgraded 2.2.1 to 2.3 yesterday
Shooting all night from about 9:30PM to 05:00AM
No issues at all - meridian flip ok, refocus on filters, guiding calibration after flip... all OK
Had saved targets so I had no time to play with Atlas changes - saw new rectangle there. But basic functionality is just fine in my case on iOS

StarMedic

TomasK where? Testflight still says 2.2.2 on my phone.

StarMedic

w7ay I only see 2.2.2 betas. How did you get 2.3 to show up?

w7ay

Build 17 of ASIAIR Beta v2.3 just came out on iOS/iPad/macos TestFlight. Fixes that need to be tested now include these:

Chen

StarMedic

w7ay been testing. Still had issues with station mode just stopping working mid runs so something is still up with that. Using direct mode everything seems to be working ok.

johnpd

w7ay

I assume the "occasional DSO Stack crash" refers to Live Stacking. There was an issue that at times when you start stacking, no images are downloaded and no stacking takes place. You had to restart everything to get it working again.

JohnD

azskyguy

[unknown] Doesn't sound like the massive network errors have been fixed. From the notes it appears the corrupted frames from the 2600 MC Air are fixed, which would be great. When one of those frames appeared, it brought the entire automated process to a halt.

Lewisite

brazzo229 Thank you!!!

zwo2_jacky

Yesterday I was out and about with Asiair Plus and beta-firmware 2.3 (Android) + ASI2600MC Pro. Platesolving for polar alignment would not work, although 3000 stars were recognized. After a few attempts back to Preview and there Detect. Back to Polar Alignment and now the Platesolving worked.
In Preview, the scroll bar for the exposure time remained at 60 seconds and could not be changed to a longer time. In autorun mode, however, 300 seconds was also possible.
Otherwise the system worked. The meridian flip also worked perfectly.

« Previous Page