ASIAIR v2.4 Public Beta Released!: Page 4

ASIAIR v2.4 Public Beta Released!

azskyguy

I have seen this same freezing and reported it. Pausing and restarting session is a workaround but impractical for unattended imaging.

PMTeam@ZWO

Astro Dave Hello. Thank you for participating in our test. First of all, I would like to confirm what ASIAIR box you are using? What guiding device are you using? If possible, please send us the log after the problem occurs. Thank you.

Sonixx

Tried a full run tonight with the latest beta. Unfortunately due tu internet reception where I am I cannot upload the log, but attached this to this post.

@PMTeam@ZWO

As the logs a showing that meridian flip was reported to be on wrong side of pier I want to confirm that time, time zone, date and location is correct.

In Plan Mode ASIAIR tried to perform meridian Flip roughly 4 hours before meridian. The mount actually did not move and the app reported the flip failed. I had to manually stop the plan an re run. Never saw a behaviour like this before. When I went to sleep the plan stopped again after 11 frames. It seems ASIAIR tried a meridian Flip again before it was due. But the mount was properly parked in the Morning. Additional earlier this night the Bluetooth disconnected from the AM5N without reason. Also this never happened before.

At the moment something seems fundamentally broken.
On the good side it seems the CAA now is working properly.

Equipment:
ASIAIR Plus 256gb
AM5N
ASI2400MC
ASO290mini
5x2 Filterwheel
CAA
EAF 5v

autorun-log-2025-06-12-000147.txt

29kB

PMTeam@ZWO

Sonixx Yes. Please cheack whether time, time zone, date and location is correct.

4yffe05h

Looking forwards to update the Camera supporting list, like Sony A7CII. Is it any plan?

paulitoweb

PMTeam@ZWO Not yet, I have to retest, I am waiting a clear sky!!!
regards,
Paolo

Sonixx

PMTeam@ZWO

This is what I meant, everything is correct. Sorry for being not clear enough. All Values are as there should be.

Today the same thing happened after a few frames. Then I re started the Plan without Auto Meridian flip on. Then this behaviour did not occur. And the plan went smoothly until Morning as the Objekt does not cross the meridian in the given time frame at all.

Asiair tries to randomly invoke meridian flips, please fix this as soon as possible.

Thanks,

Stephan

PMTeam@ZWO

Brannonq Hi. Please cheack whether time, time zone, date and location is correct.

Brannonq

PMTeam@ZWO Yes, Date, Time, Location, and Merdian Flip Settings are all correct. My Merdian flip stops imaging 5 minutes before and does not resume until 5 minutes after the flip.

PMTeam@ZWO

Sonixx 您好Hello. Please upload the error log to us after the problem occurs. Since we have not reproduced the problem, we cannot locate the cause of the error.

Sonixx

PMTeam@ZWO

Thank you. Please see the log attached to my post two posts earlier. I have currently no cell phone reception and cannot use the asiair uploader.

I could do this earliest next week.

Best regards,

Stephan

PMTeam@ZWO

Sonixx Hello. That log is not helpful for us to analyze the cause of the problem. You can obtain it in other ways and send it to me by email. We hope to solve this problem as soon as possible. After the problem occurs, long press the asiair icon on the homepage, and the log will appear. Send it to the email address: luffy.liu@zwoptical.com

Sonixx

PMTeam@ZWO
I send the mail with the log. Hope it is the correct one.

Best regards,

Stephan

sompi68

Good morning, when are you implementing autofocus on planets and Moon? It would be a great help for those like me who have problems. Thanks

R0k9pZfT

With today's update (2.4_0613_4(12.20)), temperature doesn't seem quite as stable as on 2.3.3 with the ASIAir Plus and a 2600MC-Duo set to 0C. Not sure if it's good or bad that the flat stretch on the Live page is significantly wider and all black versus 2.3.3. Can't see anything like dust specs or vignetting unless I manually move the sliders even when set to auto stretch. This is the Android app I'm using.

Brannonq

R0k9pZfT I reported the same thing, took my flats indoors and my temp fluctuated wildly while the flats came out solid grey. I had to downgrade to 2.3.3 to get flats to look normal.

stevesp

About stretching, many times I asked to have a slider for mid tones. This would make it easier

tomas-kocanda

Brannonq exactly as mine. Bug report sent. I stay on beta - so shooted flats with manual exposure time

azskyguy

Tonight imaging M16 using autorun the system tried to do meridian flips 3 times. I was more than 3 hours away from the meridian. I sent the logs through the ASIAIR app... this issue makes unattended imaging impossible.

tomas-kocanda

Beta 2.4 (12.20) on iOS, camera 2600MCPro - auto exposure in autorun create solid gray flats.
Manual exposure works.
Bug report sent

« Previous Page Next Page »