ASIAIR v2.4 Public Beta Released!: Page 4

ASIAIR v2.4 Public Beta Released!

4yffe05h

Looking forwards to update the Camera supporting list, like Sony A7CII. Is it any plan?

paulitoweb

PMTeam@ZWO Not yet, I have to retest, I am waiting a clear sky!!!
regards,
Paolo

PMTeam@ZWO

Sonixx Yes. Please cheack whether time, time zone, date and location is correct.

Sonixx

PMTeam@ZWO

This is what I meant, everything is correct. Sorry for being not clear enough. All Values are as there should be.

Today the same thing happened after a few frames. Then I re started the Plan without Auto Meridian flip on. Then this behaviour did not occur. And the plan went smoothly until Morning as the Objekt does not cross the meridian in the given time frame at all.

Asiair tries to randomly invoke meridian flips, please fix this as soon as possible.

Thanks,

Stephan

PMTeam@ZWO

Brannonq Hi. Please cheack whether time, time zone, date and location is correct.

Brannonq

PMTeam@ZWO Yes, Date, Time, Location, and Merdian Flip Settings are all correct. My Merdian flip stops imaging 5 minutes before and does not resume until 5 minutes after the flip.

PMTeam@ZWO

Sonixx 您好Hello. Please upload the error log to us after the problem occurs. Since we have not reproduced the problem, we cannot locate the cause of the error.

Sonixx

PMTeam@ZWO

Thank you. Please see the log attached to my post two posts earlier. I have currently no cell phone reception and cannot use the asiair uploader.

I could do this earliest next week.

Best regards,

Stephan

PMTeam@ZWO

Sonixx Hello. That log is not helpful for us to analyze the cause of the problem. You can obtain it in other ways and send it to me by email. We hope to solve this problem as soon as possible. After the problem occurs, long press the asiair icon on the homepage, and the log will appear. Send it to the email address: luffy.liu@zwoptical.com

Sonixx

PMTeam@ZWO
I send the mail with the log. Hope it is the correct one.

Best regards,

Stephan

sompi68

Good morning, when are you implementing autofocus on planets and Moon? It would be a great help for those like me who have problems. Thanks

R0k9pZfT

With today's update (2.4_0613_4(12.20)), temperature doesn't seem quite as stable as on 2.3.3 with the ASIAir Plus and a 2600MC-Duo set to 0C. Not sure if it's good or bad that the flat stretch on the Live page is significantly wider and all black versus 2.3.3. Can't see anything like dust specs or vignetting unless I manually move the sliders even when set to auto stretch. This is the Android app I'm using.

Brannonq

R0k9pZfT I reported the same thing, took my flats indoors and my temp fluctuated wildly while the flats came out solid grey. I had to downgrade to 2.3.3 to get flats to look normal.

stevesp

About stretching, many times I asked to have a slider for mid tones. This would make it easier

tomas-kocanda

Brannonq exactly as mine. Bug report sent. I stay on beta - so shooted flats with manual exposure time

azskyguy

Tonight imaging M16 using autorun the system tried to do meridian flips 3 times. I was more than 3 hours away from the meridian. I sent the logs through the ASIAIR app... this issue makes unattended imaging impossible.

tomas-kocanda

Beta 2.4 (12.20) on iOS, camera 2600MCPro - auto exposure in autorun create solid gray flats.
Manual exposure works.
Bug report sent

minimoto71

jsmithsd I had a similar issue ( the CAA refused to rotate until I tried at least 3 times ) and in my case it seems it was caused by the USB Hub or the Camera Hub ( I had to move the guiding camera to the hub because there are no more USB connections available when adding the CAA to the ASIAir ). I have had 3 sessions with the CAA connected to the ASIAir apparently without issues. Still have to make more test to be sure that was the issue.

tomas-kocanda

Seems like mystery about gray flat files is discovered...
Tonight had first chance to get on regular computer and check the files.
Seems like latest (and previous) beta software create gray preview (JPG) files but flats are OK.
But it's annoying bug anyway as you cannot see, what you are doing on field..¨

Brannonq

tomas-kocanda That's interesting, I never downloaded the flats to check them, I just went off the preview.

« Previous Page Next Page »