ASIAIR v2.4.2 has been released!

Luxo

So .. have plate solving and polar alignment been fixed ? Or are they still broken ? And what about disabling the 180 degree rotation of the CAA ? Hmmm ? If these aren’t fixed I suggest most would be better off downgrading to 2.1.x or 2.2.x.

deans

PA and plate solving works fine on my 2600Air and with the ASIair Plus running a 2600MC. I don't have a rotator so can't answer that.

Corsair

PMTeam@ZWO Think you need to update the product page on your website, then, because it still says HCG for 585 kicks in at a gain of 252. The graphs reflect that as well.
https://www.zwoastro.com/product/asi585mc-mm-pro/

Kevin_A

Here they are…

paulitoweb

Kevin_A thanks

Foobaria

Kevin_A What happened, how did this get to be 200? How to update our existing camera to get this? Is it just a function of ASIAIR? or the camera itself. I remember you posting the 198 recommendation.

9Ej7KtYy

Canon r8 pls

Sonixx

@PMTeam@ZWO

Thanks for updating the HCG threshold for the 585 series of cameras.

Is there a firmware upgrade for the camera necessary? How do I adjust under Nina or Firecapture?

Best regards,

Stephan

Dxvid55

PMTeam@ZWO
Thanks for upgrading the 585!
Is there any chance of AZ support for the Skywatcher AZ-EQ6 GT PRO being added at some point, or is this impossible to do for some reason?

R0k9pZfT

I started using 2.4.2 tonight. The guiding screen is very dark as compared to what it used to be, and I have all the same parameters--High gain, 0.2s exposures. 2600MC-duo. At first it selects the usual 12 stars, but slowly over the last few minutes I'm down to six stars. I've never ever seen stars drop out--especially on a clear night. And why is the guiding screen so dark now? I don't mind it darker, but losing guiding stars that I can still see in the guide window is new. And as I wrote this, another is deselected and it's down to five.

R0k9pZfT

R0k9pZfT I went back to 2.4.1 and I stopped losing guide stars. I only upgraded to 2.4.2 to rid myself of the green tint since the notes only included a few "fixes" that included some minor issues I reported, but as Luxo said--stop changing what isn't broken and focus on what has been reported. Like dithering & imaging timing.

PMTeam@ZWO

R0k9pZfT Hello. We have optimized the guide image stretching algorithm to solve the whitening problem of 220mini images for some users. We recommend that you increase the exposure time appropriately.

R0k9pZfT

I'm guessing the dithering problem I've submitted about six bug reports for hasn't been addressed yet?

Luxo

PMTeam@ZWO

Please stop changing things nobody asked for - like what you've done to the guider - and focus on fixing bugs that have been reported many times.
Please provide an honest and complete list of this things you did change.

We cannot usefully test the app if we do not know what you have changed.

bobpowell@northstate

Luxo YES!!!

Qp4P943K

Luxo

I will wait with 3.2.2 until zwo is answering......

AsOAc1ke

I have been using ASIAir 2.4.2 for the past two nights and noticed there are some issues with the catalog - the Prawn nebula (IC 4628), for example, does not exist in the catalog anymore (it used to exist before) - searching by name yields nothing and clicking the search history entry for the code (IC 4628) does nothing.

PMTeam@ZWO

AsOAc1ke Thank you for your feedback, we have reproduced this issue. The issue has been fixed and a fixed version will be released soon.

AsOAc1ke

One other bug I have been seeing for a while now is that using Sony a7 III via USB connection does not allow to select exposures longer than 30 seconds in Preview mode. Turning the camera off and on in ASIAir UI fixes the issue.

PMTeam@ZWO

AsOAc1ke Hello. Are you using Android or iOS? If possible, please upload the error log after the problem occurs. Thank you!

u3mi8IHY

On my android tablet, if I start the ASIAir app, it immediately closes. I have cycled the power, uninstalled and re-installed the app many times. I can use the app in another tablet. The tablet that does no longer work is using android 11. Any help would be appreciated. The app worked fine 2 days ago and stopped working yesterday morning.

PMTeam@ZWO

u3mi8IHY Hello. Is this problem inevitable? What actions will cause the app to close?

zephirus

Last night was able to image (clear sky miracle) - all was fine but my EAF did not focus right. I started using my Bahtonov mask, but when it did the 2° re-focus it went terribly out of focus and I have a carbon tube Ritchie-Chretien scope. Maybe the step for a 8" dual focus R-C needs to be 400 not 50 - Or is the routine just not working? EAF just does not seem to be working correctly.

R0k9pZfT

zephirus For what it's worth, I didn't have focus problems on my RedCat 91 last night. Other issues--yes--but focusing worked for me. I have the 5v EAF, not one of the newest models just released this year.

PMTeam@ZWO

zephirus Hello. We recommend that you try different AF settings with different step counts. If the issue occurs, please upload the log files to us so we can better analyze the cause. Thank you!

Qp4P943K

Sorry : 2.3.3......

viperduude

Upgraded to 2.4.2 last night. Guiding stopped repeatedly. No “lost star” warning. Just went from guiding to looping. I submitted bug report and uploaded logs.

viperduude

viperduude Tried a second night. Same problem. I thought it might be a problem with dithering. Turned dithering off, same problem--ASIAIR just stopped guiding and went into looping mode. I submitted another bug report with uploaded logs.